Printrbot Go Large Fully Assembled 3D Printer, 24" x 12" x 12" Maximum Build Dimensions, 100 Micron Resolution, 1.75-mm ABS and PLA Filament

Price:
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


Check also these Latest News blog posts related to Printrbot Go Large Fully Assembled 3D Printer, 24" x 12" x 12" Maximum Build Dimensions, 100 Micron Resolution, 1.75-mm ABS and PLA Filament

Manufacturer Description

The Printrbot Go Large Fully Assembled 3D fused-filament-fabrication printer with triple extruders is designed for portability and has an open platform for fabricating parts up to 24 x 12 x 12 inches (H x W x D) using three 1.75-mm ABS or PLA filaments (sold separately). The printer has a wood frame that folds into a compact, portable box with handle for transport or storage. Collapsing the frame for transport does not require dismantling any parts, and the hard shell protects all internal components. The triple extruder enables printing in three colors or materials, including water-soluble PLA for temporary support structures in a printed part. The printer head moves on the X (left to right) axis and Z (up and down) axes, while the bed moves on the Y (backward and forward). The printer uses open source software and connects to the computer using the included micro-USB cable. The integrated Raspberry Pi single-board computer allows computers, tablets, and capable phones to connect remotely to the printer over Wi-Fi and control the print job. The printer accepts a battery (sold separately) for use when a power outlet is not available.

The print table is machined-flat MIC 6 aluminum cast plate and includes an auto-leveling probe that works with the user-chosen computer software to provide a level print surface. The guide rails have a 12-mm diameter for stability and dual NEMA 17 motors with linear bearings for smooth vertical movement of the print head. The GT2 belt and aluminum pulley system facilitates precise movement of the print head. The hot end has a maximum resolution of 100 microns and includes a shrouded fan to help solidify the molten material by directing air toward it as it is extruded onto the print table. The printer includes two sample lengths of PLA (polylactic acid) filament.

Specifications
Compatible filament materialABS, PLA
Filament size1.75 mm
Maximum hot-end temperature270 degrees Celsius (518 degrees F)
Maximum resolution100 microns
Maximum build volume14.96 gallons
Maximum build dimensions24 x 12 x 12 inches (H x W x D)*
Heated or ambient bedAmbient
ConnectionMicro-USB (included), micro-SD card (included)
Untethered printingYes. Wi-Fi connection requires Octoprint software. Micro-SD card use requires micro-USB cord to start print job before untethering.
Supported operating system(s)Mac, Windows, Linux
SoftwareOpen Source. Repetier-Host with Slic3r or Cura recommended.
Input formatStl, g-code
Nozzle diameter0.4 mm
Power requirements12 VDC
Overall dimensions before setup39 x 36 x 13 inches (H x W x D)*
Overall dimensions after setup39 x 36 x 24 inches (H x W x D)*
Weight68 lb.

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.


Fused filament fabrication printers build prototypes and parts directly from computer-aided-design (CAD) data sources by stacking layers upon layers of molten material. The print material is provided in filament or wire form and is fed through an extruder within the print head, similar to how ink is used in a standard printer. A printer with a single extruder can print using one filament at a time; a printer with dual extruders can print with two different materials or colors at the same time. The thickness of the printed layers can be customized for each print, but the thinnest layer that a printer can lay is called its maximum resolution. Choosing to print using very thin layers will create parts with more detail, but will typically take longer to print. To lay the material in the correct way, the print head and bed typically move in a combination of X-axis (left and right), Y-axis (forward and backward), and Z-axis (up and down) movement.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What's in the Box?

  • Printrbot Go Large printer (assembled)
  • ATX power supply
  • Power cord (36" length)
  • Micro-USB cable (36" length)
  • Wi-Fi dongle
  • Micro-SD card with standard SD adapter
  • Spool rack (unassembled)
  • (3) Sample lengths of 1.75-mm PLA plastic filament
  • Hardware

Product Features

Fabricates parts up to 24 x 12 x 12 inches (H x W x D) in size or 14.96 gallons in volume Prints layers up to a maximum resolution of 100 microns Fabricates parts using 1.75-mm ABS or PLA filament (sold separately) Folding design with handle enables transport and storage without dismantling the printer Triple extruder can print simultaneously in three colors or materials